Tagged With "502C"


Panaray 502C setup tips after mixer replacement

GShaffer ·
I know this is an old system, and this may cause some head scratching, but our church has a Panaray system with one 502BP sub woofer, three 502A controlled array speakers and a 502C System Controller. We just replaced our Allen&Heath analog mixer with a digital Behringer x32 along with an S16 digital snake and we threw in an X-Dante card and a D400-Dante distributer and 7 A320 personal mixers for IEMs. I removed a stack of hardware equalizers (3-2 channel) and compressors (2-2 channel).

Panaray System Controller 402C vs 502C

jlex ·
I have a pair of 402's used as mains for a small band (used with the 402E controller they were purchased with). I've added a 502BP and would like to replace the 402E controller with a 402C controller that has the crossover built in to simplify connections. It seems 402C's are not easy to find but 502C's are more readily available. Is the EQ curve of the 502a similar enough to the 402's to work for my system? Thank you for your help.

Re: Panaray System Controller 402C vs 502C

ChrisJ-at-Bose ·
Hi Jlex, The 502A and 402 EQ curves for full range and for mid-high crossover are a bit different. Not by leaps and bounds, but the 402 is more complex, and has a higher low-frequency bandpass, when used with a bass cabinet. As for the proper legacy controller, it would still be the 402C. Our current controller option would be the ControlSpace SP-24. Best regards, ChrisJ-at-Bose

Re: Panaray 502C setup tips after mixer replacement

BrianK-at-Bose ·
There's an input sensitivity switch on the back panel with two settings: -10/+4 dBV.
Having trouble signing in?

We recently updated our sign-in procedure and if you have old sign-in data cached, this can create a problem. Please:

  1. Clear your browser cache and cookies
  2. Then close the browser (not just the window)
  3. Open the browser and try again
Thank you

Please make sure that your profile is up to date