Tagged With "command"

Topic

PuTTY

jmccutcheon ·
I am trying to see the command strings as they are written by using PuTTY. When I connect I get the following: So I need a login? This is using the 10055 port. How can this be done?
Reply

Re: PuTTY

Arno-at-Bose ·
Hi Jay, I cannot see the image you uploaded. But there should not be a reason for logging in when connecting via SoIP. If you see a login window, this probably means there is something wrong with the unit. Can you see if the power LED is red? Have you updated to CSD 5.1.1 or CSD 5.2 and your design is using GPI/Pset recall or Logic Pset recall? If so, please check this link BR Arno
Topic

Unable to send a rs232

Gustavo Garcia ·
Hi guys, I’ve trying to control a NEC projector using the Rs232 port of one EX-1280C without success. I verified the cable and the protocol and the projector configuration. Everything is correct from that side. Also I tested a Christie projector just to verify and this works. i am attaching a picture. The first command is the Christie command and it works. The next commands are the Different ways I have tested the NEC commands without success. the interesting thing here is that if I sent the...
Reply

Re: Unable to send a rs232

Arno-at-Bose ·
Hello Gustavo, Did you try to monitor the serial output of the EX-1280C, to see what the EX-1280C serial port is sending? I just tested the following: POWER ON: \02\00\00\00\00\02 RECEIVED: <02><00><00><00><00><02> So that looks good. Could it be that the RS232 port settings on the projector is not set as the same as the EX-1280C? BR Arno
Reply

Re: Unable to send a rs232

Berd ·
Hi, Also check the baud rate as well, otherwise it will not talk to each other. Cheers!
Reply

Re: Unable to send a rs232

Arno-at-Bose ·
Hi Berd, Thank you for replying also. It turned out to be a beta version of the EX-1280C Gustavo is using. He tested with an ESP-880 and the communication worked fine. BR Arno
Post
Having trouble signing in?

We recently updated our sign-in procedure and if you have old sign-in data cached, this can create a problem. Please:

  1. Clear your browser cache and cookies
  2. Then close the browser (not just the window)
  3. Open the browser and try again
Thank you

Please make sure that your profile is up to date
×
×
×
×