Trying to produce Demo quality Vocals/Guitar to create MP3 files to secure performance gigs.

Hi Everyone...sure could use your help on this problem.

Issue: Trying to produce Demo quality Vocals/Guitar to create MP3 files to secure performance gigs.

Backstory: Using the L1 Model 11 with T1 Tonematch.

1) have connected a "Countryman" headset mic into the T1

2) Have an AKG high quality mic in front of a Fender Twin Reverb Amp and plugged into input #2 on the T1

Problem: I'm trying to send the "output" ((both voice/guitar) from the Bose into the main input of the RC 300 Looper to produce a demo MP3 file. If I plug the voice mic and the Fender Twin Reverb mIc, directly into the 300 Looper, works just great...but the Looper has no reverb or other controls...that's why I want to take the total output from the Bose into the Looper...that';s where I'm stuck...which output from the Bose System or the T1 should I use to feed into the Looper.

Thanks in advance for all replies.

Original Post

Hi ST...

unfortunately, that did not work. Problem was two-fold...

1) Couldn't get a clear sound from the Main Output of the T1 into the Looper

2) When I increased the volume from the T1, ended up with a very audible hum on the line leading into the Looper and so the Looper recording also had a high hum...

Thanks for the response...I'll keep trying.

 

Hi George,

George Gonzo posted:

Hi ST...

unfortunately, that did not work. Problem was two-fold...

1) Couldn't get a clear sound from the Main Output of the T1 into the Looper

The T1 Master Output is a clone of what you hear through an L1 connected via the ToneMatch port. The signal should be clear.

Boss RC300 from T1



2) When I increased the volume from the T1, ended up with a very audible hum on the line leading into the Looper and so the Looper recording also had a high hum...

Thanks for the response...I'll keep trying.

That sounds like a ground loop problem. Please make sure everything (L1 or T1 and Boss Power Supply) are all connected to the same power source (same power bar).

ST

Attachments

Photos (1)

Add Reply

Likes (0)
Having trouble signing in?

We recently updated our sign-in procedure and if you have old sign-in data cached, this can create a problem. Please:

  1. Clear your browser cache and cookies
  2. Then close the browser (not just the window)
  3. Open the browser and try again
Thank you

Please make sure that your profile is up to date
×
×
×
×