Improved AUX out feature needed!
Possible solutions for future FW updates:
An option to use a channel, let's say just ch4, as and output channel rather than an input?
this would also require a menu item available on ch 1-3, showing ch4 as a selectable destination. Selecting this would not stop the signal from going to the main out though. It would just go to ch4 as well, but ch 4 would NOT be sent to the main mix when selected as an output, only to AUX 1 or 2.
This would be to allow me to route ch 1-3 to channel 4 which would be an output, that can then be routed to either AUX out 1 or 2.
This would facilitate a 3 part mix to be sent to a monitor with control over not only individual volumes but also over the group volume independent of the main volume. This would be awesome!
Add a menu command to enable ch4, (or all channels), to be routed discretely to the AUX outputs, bypassing the main mix. This would allow me as we discussed, to route ch 1-3 to AUX 1 then via a patch cable from AUX 1 to CH4 input, which could then be routed from ch4 to AUX2 discretely by selecting the new menu command above. (I would expect this to be easier than option one)?
This option should achieve the same result as option one, but without the need for the patch cable.
I think it shouldn't be too difficult for Bose to add this functionality.
I would really love it if it could be done.
I paid a LOT of money for the T4S, It should be making me breakfast in bed!
You can read more about this on the original thread: