Tagged With "Feature Request"

TopicFeatured

F1 Model 812 and F1 Subwoofer Feature Requests

ST ·
What features would you like to see in the F1 Model 812 and F1 Subwoofer? Tell us what you would like to see added, and why. We can't promise that Bose will acknowledge or act on every request, but you can be sure that they are following this discussion closely. ST
TopicFeatured

T4S/T8S ToneMatch Mixers Feature Requests

ST ·
Let's use this topic to capture our ideas for feature requests for the T4S/T8S ToneMatch Mixers. Tell us what you would like to see added, and why. We can't promise that Bose will acknowledge or act on every request, but you can be sure that they are following this discussion closely. ST
Reply

Re: S1 Pro system: Feature Requests and Suggestions

ST ·
Provide a foot switch to disable the reverb on Channels 1 and 2. The inspiration for this request is in @theonemanband 's discussion: Delighted............but
Reply

Re: S1 Pro system: Feature Requests and Suggestions

ST ·
Make S1 Pro capable of handling low end content as well as the L1 Compact. The inspiration for this request is in @jdbassentertainment.com 's discussion: Bass over excursion or port noise - Turn Down For What?
Reply

Re: T4S/T8S ToneMatch Mixers Feature Requests

ST ·
Different reverb types on different channels instead of one global reverb type applied to all channels. This request comes from @ScubaBadger in Reverb and effects on T4S
Reply

Re: S1 Pro system: Feature Requests and Suggestions

Archtop Eddy ·
This is more of a suggestion than a feature request. Maybe even an observation or opinion... Anyway, here goes: I think Bose should use a stiffer three-way switch for flash/off/on. The reason? I took a fully-charged battery-powered S1 to a gig. Turned out, I didn't use it so it still had a full charge when I went home. The next day when I checked on it, the charge was in the red and the switch was in the "on" position. Apparently, while I was driving back from the gig, the unit was jostled a...
Reply

Re: S1 Pro system: Feature Requests and Suggestions

Ritzy ·
Further to this: implementing a DSP (signal limiter and a subsonic filter @ 62Hz) to prevent excessive bass signals from being reproduced would be good. User configurable would be even better!
Reply

Re: S1 Pro system: Feature Requests and Suggestions

jdbassentertainment.com ·
Totally! As I see it this is the only thing that could be improved upon... Other than this small issue I am thrilled with my S1 Pros!
Reply

Re: T4S/T8S ToneMatch Mixers Feature Requests

Poppers ·
I too would like the abiliity to apply different reverb types with different time settings per channel on a T8S!
Reply

Re: S1 Pro system: Feature Requests and Suggestions

Archtop Eddy ·
S1 Pro App feature request: Turn on/off Auto EQ While normally I find the S1 Auto EQ feature to be acceptable for my gig situations, there are times I wish I could turn it off and be able to configure my unit at whatever angle I wish without affecting my EQ settings. Is there any chance that Bose could include a means to turn on/off the Auto EQ in the Bose Connect or a separate S1 Pro App? Thanks!
Reply

Re: S1 Pro system: Feature Requests and Suggestions

ST ·
Hi Archtop Eddy, I see the Forum Administrator moved your post here. That's good as it means it will be seen by the right people. Please see this article about the S1 Pro Auto EQ to understand what Auto EQ is doing, and why. We've also got an ongoing discussion: S1 Pro - Can I bypass the Auto EQ ST
Reply

Re: T4S/T8S ToneMatch Mixers Feature Requests

Victor T ·
I would love to see: 1. a case or bag/ cover for T4 2. like to see In the future 2 IEM (headphones) 3. screen that could show the eq curv. 4. Bluetooth app / connectivity to stream and control T4 5. Be able to use Aux in 5&6 and send out in Aux out 1&2
Reply

Re: T4S/T8S ToneMatch Mixers Feature Requests

rycowan ·
I have a T1, but same applies to T4 and T8: make available an optional rechargeable battery power supply to make the mixers a better companion to the S1 Pro.
Reply

Re: T4S/T8S ToneMatch Mixers Feature Requests

Doug 3 ·
WAV/MP3 music streaming from Flash Drive First, KUDOS for some of the new features in the T4S: Master Out EQ - Thank You! Now the system can be adjusted for the room acoustics that are encountered in various venues! Stereo Out, to two L1 systems - Thank You! I can leave a lot of other paraphenalia home now. MAJOR REQUEST: Provide option to have the music player stop after playing ONE music file from a flash drive. I'm a solo musician who sings with backing tracks. When a song has finished, I...
TopicFeatured

S1 Pro system: Feature Requests and Suggestions

ST ·
Let's use this topic to capture our ideas for feature requests for the S1 Pro system. Tell us what you would like to see added, and why. We can't promise that Bose will acknowledge or act on every request, but you can be sure that they are following this discussion closely. ST
Reply

Re: T4S/T8S ToneMatch Mixers Feature Requests

Dave Hazel ·
Hi Doug, I'm with you 100%.... Same here, I'm a solo vocalist using 100% backing tracks. One of the main reasons I bought the T4s was because of the CLAIM it had an in-built media player. I was so bitterly disappointed with it! Not only is it totally useless other than running background music, the display will not show more than 65 items, files or folders. Put 75 tracks in a folder and you'll only see 65 of them on the T4s. In addition to that, it's CLAIM to be able to play WAV files is...
Reply

Re: T4S/T8S ToneMatch Mixers Feature Requests

KingBiscuit ·
I was discussing the new T4S with a friend of mine who has been using his L1 M2 with T1 for years. This guy is a really busy musician and plays 5 or 6 shows a week. He had an interesting feature request for the T series mixers....He'd like to have a lighted digital clock along the top of the mixer, about where the Bose logo is. He said that when he's playing shows, he tends to lose track of time and hates to look at his watch while on stage. I found this to be an interesting feature request.
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

Ryan Martindale ·
Definitely Bluetooth on the 812, as well as the use of the Bose Connect app. Would be nice to have DSP features on the sub and 812 as well, but I get that Bose is trying to keep things as simple as possible for users.
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

djadvisor ·
An app that lets me see if the speakers are clipping and set the EQ. or DSP settings.
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

jdbassentertainment.com ·
A magical set of waveguides (user attachable) that would allow you to use multiple F1 812s per side (of a stage) if the user needed more output than one per side could give them. These wave guides would eliminat comb filter issues that would typically happen with these speakers a such close proximity!
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

djmaverick ·
Ability to adjust the height of the built-in stand (often times it is not high enough to get over the heads of big crowds. The ability to stack multiple F1s on top of each other to create a bigger array.
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

Ryan Martindale ·
I second the idea of having the ability to adjust the height of the built-in stand.
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

vik ·
A cardioid version of the F1 Sub and the ability to send audio over AVB directly to the 812 and Sub.
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

jdbassentertainment.com ·
Re: F1 Model 812 and F1 Subwoofer Feature Requests
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

Litesnsirens ·
I agree with the idea of adjustable height. I had mentioned a while back that it might even be good if they made a much shorter bracket that would essentially allow the 812 to sit pretty much directly on top of the sub. Then if they could created some sort of bracket to securely allow you to stack another 812 on top of that whole rig. granted I’m envisioning a completely different type of bracket but that would allow you to scale up the rig when you need more volume.
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

Litesnsirens ·
I think it would have to be a completely different rig... Maybe that can be bolted onto the fly rig holes. Maybe include latches to keep things sturdy. I think sound-wise it would just extend the line array and allow us to play bigger venues.
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

jdbassentertainment.com ·
I think the F1 sub isn’t wide enough to go much higher with the F1 tops safety, which is why it is as low as it is. Just a thought.
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

Litesnsirens ·
Right, but the supplied mount is almost the height of the 812. So if the first 812 could be mounted directly on the sub, then the second 812 may at most be a few inches taller than the current setup.
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

jdbassentertainment.com ·
Oh I see, that would be a cool!
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

wavesound ·
I would vote for a more powerful rig that incorporates the integrated design of the F1 Sub and the 812. These are great speakers but a pair is not suitable for audiences of more than 200 people if you're a DJ or looking for more physically engaging audio experience on the go. I would also appreciate more attention paid to the materials. Coming from an L1, I appreciate the improved presence of the midrange, but overall, I find the 812s muddier and less intelligible than the L1 series and less...
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

Simon Patrick ·
Great thoughts here...I could not agree more! Love the S2 idea...
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

ModernVintageDC ·
Hello ST and fellow members, For those of use the F1 stack as a a true FOH solution (as designed) with a band, it would be nice to see an 812 that is more orientated by design as a dual purpose FOH/Wedge option...Almost like cross between an 812 and S1 Pro. Using QSCs for a few years, it was a nice option to mix and match K12s as FOH/wedge(s) as needed. Understanding the 812 was not designed for use a wedge, the S1 is about the only option. I have been getting great results using S1s as...
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

Pr Globuloff ·
From La Rochelle/FRANCE... Hope my english is OK ! I've been using "4xSub 302 and 8x802 with 4 amplifiers BOSE 1800-VI" since 1998. Proud to be sound engineer for rock-jazz-blues-reggae or even classical music'groups all along, with audience to 2,000 people max, i first heard the F1 system on the 1st of July 2018. Waoooouh ! On September, i decided to sell my whole system, then immediatly bought 2 F1 Sub + 2 F1 812. Too happy to keep on the roads, at the moment, people are very surprised to...
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

Pr Globuloff ·
Setting up the F1-812 and the Sub "outdoor" ! Sometimes, it shouldn't be necessary to fix the 812 on the "supplied mount" of the Sub. But when you just pose the 812 directly on the Sub, it doesn't stand perfecly. We have to securit the system with a belt all around. It's a pity that BOSE didn't think of this so singular utilisation ! And the system is so nice to see without the "hole" caused by using the supplied mount, isn't it ? Photos : FOH at French "Festival Marais Vintage" near La...
Reply

Re: F1 Model 812 and F1 Subwoofer Feature Requests

jdbassentertainment.com ·
I would say making a water resistant... using the same technologies that Bluetooth speakers use would be GREAT! I am not sure why cheap Bluetooth speakers can be water proof, and Bose portable PA gear is not... in fact this is true of all pro audio powered speakers. One idea I had was to have the power cord on the bottom and perhaps have the F1 have a lip around the bottom of the speaker so that if rain was blowing in on the side the power cord would be safely tucked up out of the way...
Reply

Re: L1 Feature Requests

Scott ·
I've owned and used an L1 compact gigging with an acoustic duo for about 2 years. As others have said, XLR line input or combo would be my #1 request. Also line array off the back not front. Beyond that more mixer capacity but that would add cost. I've used the T1 and TS4 mixers with the L1 because I need 3 channels but moved to a tablet based system. Ideally you could make a mixer module that you could plug to the L1 or any bose system that had a tablet interface. I'd even suggest a...
Topic

Bose Connect App Feature Requests and Suggestions

ST ·
Let's use this topic to capture our ideas for feature requests and suggestions for the Bose Connect App . Tell us what you would like to see added, and why. We can't promise that Bose will acknowledge or act on every request, but you can be sure that they are following this discussion closely. ST
Topic

Transpose Feature on Tuner on ToneMatch Unit

Jim 5 ·
I've had my system for about 3 years and I'm still learning about it's features. In the tuner mode, I see a selection for "transpose." There are the following options to choose: bb, b Normal (default), #, ## (what do these mean?). How does the transpose feature work? I was hoping to be able to transpose my guitar from standard tuning to D tuning by just pushing the select button. Can this be done? If so, how? I fooled around with this feature and got the transpose section to register a D...
Reply

Re: Transpose Feature on Tuner on ToneMatch Unit

Bose Pro Community Admin ·
Hello, Jim. Thank you for joining the Bose Pro Portable PA community. Using the Transpose mode does not change the sound of your guitar. It changes the display of the Tuner. For example: when you are in the bb mode (full tone down) when you tune the low E string to E on the T1® display, you are actually tuning to D. The same applies to the rest of the strings. Here is the documentation. This capability was introduced after the T1® was launched so this explanation is not in the T1® Owners...
Reply

Re: T4S/T8S ToneMatch Mixers Feature Requests

Dino_N ·
1) rack mountable. 2)better and bigger screen display. It's 2018, I'm expecting a more robust, better graphic than the current dinosaur display with graphics from the 1990s era.
Reply

Re: S1 Pro system: Feature Requests and Suggestions

ST ·
Use the light on the front of the S1 Pro to indicate if any of the channels are clipping or the system limiters are active. This is similar to what you do with the F1 Model 812 and F1 Subwoofer. ST
Reply

Re: S1 Pro system: Feature Requests and Suggestions

Brent L Lewis ·
get a battery phantom power denecke ps-1a. single phantom power. be sure to either reverse the batteries when done or easily remove them. great buy! clean sound
Reply

Re: S1 Pro system: Feature Requests and Suggestions

ST ·
Phantom power on channels 1 and 2. I'd like to use the same microphone (phantom powered) on all my Bose systems. ST
Reply

Re: S1 Pro system: Feature Requests and Suggestions

Starvin ·
I would like to see a party mode/stereo mode app like they have for the revolve + when connected to bluetooth. It would be a nice option to have a bigger (than the Revolve+) Bose sound around camp fires , beach parties, pool parties or just listening to a nice stereo mix in the living room.
Reply

Re: S1 Pro system: Feature Requests and Suggestions

Sksisme ·
We just received our brand new Bose S1, ordered through Guutar Center, and used it daily for one week. ✄ - ✂ - ✄ - ✂ - ✄ - ✂ - ✄ - ✂ - ✄ Please follow this link to the new discussion for your question; S1 Pro Stopped working Thank you
Reply

Re: T4S/T8S ToneMatch Mixers Feature Requests

jdbassentertainment.com ·
Three sets of stereo inputs... or a way to link channels to make more stereo inputs... a 19” rack mounting option.
Reply

Re: T4S/T8S ToneMatch Mixers Feature Requests

Jim Mead ·
My ideal system would be a T8s with an ethernet output compatible with Dante, MADI, EtherSound, or A&E ME-U. For gigs large enough to need monitors, performers like individual mixes. Looks like the T4/T8 aux outs are selectable per input channel, but I need each input routed to multiple outputs and separate monitor mixes. Something like the Dante or A&E ME-1 make this easy. I currently carry the A&E QU-16 when I need these, but I find the mixer itself is big, bulky, and...
Reply

Re: S1 Pro system: Feature Requests and Suggestions

Oldghm ·
I know they tried to keep it simple for ease of use and price point, but; I'll second the phantom power. And ............... I'd like to see both the Compact and the S1 Pro with three full channels and the Bluetooth / 1/8 inch. I also like the RCA record outputs on the Compact, that would be nice to see on the S1 Pro. Even as a solo act, I almost always use at least three channels when using the Model II / T1. It would be nice to have that capacity on all the systems. O..
Reply

Re: T4S/T8S ToneMatch Mixers Feature Requests

ScubaBadger ·
Inputs 5&6 to be treated as left and right at the two digital output stage - switchable to full mono (summed stereo) to each digital output.
Reply

Re: S1 Pro system: Feature Requests and Suggestions

jdbassentertainment.com ·
If we are requesting things that are not there... in that case I wouldn't mind an Eq on channel three... especially if they are not going to fix the port noise distortion issue... this way while playing a song via Bluetooth you could turn down the bass a little on certain songs that have this type of bass with out turning down the overall volume.
Post
Having trouble signing in?

We recently updated our sign-in procedure and if you have old sign-in data cached, this can create a problem. Please:

  1. Clear your browser cache and cookies
  2. Then close the browser (not just the window)
  3. Open the browser and try again
Thank you

Please make sure that your profile is up to date
×
×
×
×